Rice Lake 181881 Скачать руководство пользователя страница 13

Страница: 13 / 74

Installation

© Rice Lake Weighing Systems

●

2.3 Correct Platform Use

Refer to the transit area and the positioning bands for the proper transit path and weighing location.

Avoid transit over the display to preserve correct operation and to prevent accidental scratches.

Figure 2-6. Transit Areas and Positioning Bands

Always position the wheel weigh pads so the transit path onto and off of the platform fully utilizes the ramps.

Figure 2-7. Use Ramps Fully

IMPORTANT: Failure to heed the following could result in equipment damage.
•Do not weigh vehicles carrying liquids when using an axle-weighing system.

•The type and maintenance state of the vehicle being weighed can effect the weighing performance.

•Always keep the same direction of travel once the system has been optimized.

2.4 Applications

The Load Ranger weigh pads can be arranged to serve multiple applications. The adjustment from one scenario to another is

made quickly and easily with the wireless and portability features of the Load Ranger system. This section highlights several of

the arrangements available.

2.4.1 Wireless Setup

A wireless system allows for weighing with up to 16 connected wheel weigh pads per Ai-1 indicator.

Two Platforms

Applications include weighing axles of the vehicle individually or trailers with only one axle.

Figure 2-8. Two Platform Application

Transit Area

Positioning Bands

Содержание 181881











































































Результаты поиска

Содержание 181881

Отзывы:

Бренды по названию

Популярные бренды

Rice Lake 181881, Техническое руководство

Результаты поиска

Содержание 181881

Отзывы:

Бренды по названию

Популярные бренды