Ricardo 63408, Руководство по эксплуатации и уходу

Страница: 8 / 20

User manual
6
4- Attach the desired shaping disc onto the disc support, where the
auger has been inserted. The flat side of the disc should be on
the outside. The disc must snap on to the fixing point.
NOTE:
The appliance comes with the lasagna shaping disc
already installed.
5- Screw the disc holder onto the disc support, turning it clockwise.
Do not overtighten. NOTE: Always install the shaping disc before
the shaping disc holder. Never install the shaping disc inside the
disc holder to install them together in the base.
6- Place the lid on the mixing bowl by aligning the arrow on the
base with the arrow on the lid. Turn the lid to the symbol
to lock it in place. You should feel and hear it click into place.
NOTE:
this appliance is equipped with a safety device that will
prevent it from working if the lid is not securely in place.
PREPARING INGREDIENTS
Before turning on the pasta machine, prepare both the dry and liquid ingredients in advance.
1- Use the measuring cup included with the appliance to measure 1 cup of flour. Remove excess
flour with the provided knife. One full cup equals approximately 250 g. Do not shake or tap
the cup to remove excess flour to avoid altering the quantity of flour.