Page
19
/
33
4.4- Switch on/off
•
Hold the tool firmly with one hand on the control handle.
•
Hold and control the tool with another hand on the grip surface. See Fig. 9.
•
Press and hold the trigger lock (8) with your thrumb.
•
Pull the trigger switch (9) to swtich on the tool.
•
To switch off the tool, release both trigger switch and trigger lock.
Fig. 9
V. OPERATION
5.1- Intended use
This tool is desigend for domestic use only. It is suitable for garden prunning, such as cutting
branches and limbs. It is not intended for felling trees, cutting logs or cutting other materials
(such as metals, plastics or masory). Do not use in artisanal, commercial, professional and/or
industrial applications.
5.2- Operation
WARNING!
Before starting operation, make sure there is no utility lines (gas pipe, water pipe
or electricity cable) near the working area.
Before starting
•
Check the product and accessories for any signs of damage.
•
Make sure the battery is sufficiently charged.
•
Wear appropriate protective equipments.
•
Make sure the bar and chain are properly installed and adjusted.
•
Lubricate the chain, if necessary.
Pruning
•
Remove any foreign objects to ensure the wood is free of materials such as nails, spikes,
cables or wires.
•
Remove the chain scabbard (6) before starting the tool.
•
Start with cutting lowest branches first,
avoid cut above shoulder height.
•
Hold and control the tool with both hands. Maintain firm and steady pressure on the tool
while cutting. Do not force the tool through the wood.
•
CAUTION!
The weight of the tool may be changed unexpectedly when the tool just cut
through the wood.
•
In case of emergency situation, switch off the tool imemdiately and remove the battery.
