ATTENTION! The supplied tube parts
have to be mounted otherwise the
machine will NOT work!
(Built-in safety switch!)
b)
Safety switch
Your blow-vacuum has a built-in safety switch that prevents the machine from being started in
case the supplied tubes are not mounted.
Shoulder strap
Open the snap fastener, thread the strap through the clip on the
top of the handle and then close the snap fastener.
To adjust the shoulder strap to the required length, simply slide
the adjustable strap buckle forward or backwards
Leaf collection bag
To secure the leaf bag to the machine, simply attach the buckle to
the lower tube section and fix the bag opening over the leaf
discharge point on the bottom of the motor casing.
V. OPERATION
5.1- Intended use
- The blower/vacuum is designed to blow/vacuum leaves as well as lawn debris such as grass
clippings and small twigs. It is not to be used for any other purpose
- The device is only to be used on dry surfaces,
- The device is intended for non-commercial use in private home* and gardens. Under no
circumstances is it to be used in public outdoor areas, sports stadiums or in agricultural or forestry
settings.
5.2- Operation
5.2.1- Operation
Ensure that the blower vacuum is only connected to conventional sockets with a 240V alternating
current supply.
Only use extension cables if they are really necessary.
The use of extension cables may cause a drop in voltage, which will result in the machine not
performing to its peak or the motor overheating.
To switch ON and OFF :
To switch on the blower/vacuum: push in the On/Off trigger switch (9).
To switch off the machine: pull the On/Off trigger switch (9).
Speed adjustment:
You can vary the speed by turning the switch knob (10) from position 1 (low speed) to position 6
(high speed).
5.2.2- Use.
The easiest way to use the blower vacuum is to place the shoulder strap in a comfortable position over
your shoulder and hold the rear handle at hip height so that the majority of the machine's weight rests on
the rollers.
