3.1- For safe operation
1. Never operate this product when you are fatigued, ill, or upset, or under
the influence of medication that may make you drowsy, or if you are under
the influence of alcohol or drugs.
2. Wear personnel protective equipment: gloves; safety footwear, snug
fitting clothing, goggles or face protection, hearing and head protection
devices.
Use vibration-proof gloves.
3. Do not allow other persons to be near the product when starting or cutting.
Keep bystanders (esp. children) and animals out of the work area.
Children, pets and bystanders should be kept away when you start or operate
the product
Keep children away:
The use of this product by children is forbidden.
Keep the product away from children or from their environment.
Never allow children to operate the appliance. Children should be supervised
to ensure that they do not play with the product.
Never leave the product unattended.
4. Never start working until you have a clear work area, and secure footing,
5. Always hold the product firmly with both hands when the engine is running.
6. Keep all parts of your body away from the vacuum tube when the engine is running.
7. Before you start the engine, make sure the vacuum tube is not obstructed.
8. All product service, other than the maintenance listed in the Instructions
Manual, should be performed by competent service personnel.
9. Always switch off the engine before setting it down.
10. Do NOT expose to and do not use during bad weather conditions: never
work in bad weather (e.g. rain, storm, snow, high wind …), when visibility is
poor or in very high or low temperatures.
11. Keep the handles dry, clean and free of oil or fuel mixture
12. Operate the product only in outdoors or in well ventilated areas.
13. Do not operate the product while standing on a ladder or any other unstable footing
location.
14.1. Become familiar with the controls and the proper use of the equipment.
14.2.Store idle machine
When not in use, product should be stored in a dry, high or locked up place, out of reach of
children.
14.3. Do not force the tool
It will do the job better and safer at the rate speed for which it is intended.
The product will do a better and safer job if it is used only for the purposes it was designed
for.
14.4. Remove adjusting keys and wrenches
Form the habit of checking to see that keys and adjusting wrenches are removed from the
machine before operating it.
14.5. Defective switches or other part that is damaged should be properly repaired or
replaced by an authorized service centre. Do not use the machine if the switch does not
turn it on and off.
14.6. Warning
The use of any accessory or attachment, other than those recommended in this instruction
manual, may present a risk of injury to persons or animals and may cause damages.
