- Insert a hitch pin (Fig.4d)
- Move the hitch pin with forceps around the axis (Fig. 4e & 4f)
- Clip the wheel cover (Fig. 4g)
- Repeat the same operation for the remaining 3 wheels
Fig. 4a
Fig. 4b
Fig. 4c
Fig. 4d
Fig. 4e
Fig. 4f
Fig. 4g
4.7- Setting up batteries
- Lift the battery cover (Fig. 5a)
- Insert batteries in the slots provided (Fig. 5b)
- Place the security key in the slot provided for this purpose (Fig. 5c & 5d)
Fig. 5a
Fig. 5b
Fig. 5c
Fig. 5d
4.8- Adjusting the cutting height
Pull the handle slightly toward you (Fig. 6a) to pull the lever out of its gear and place it at the desired
cutting height (6 positions from 20 to 65mm).
