- Then restart the machine
Warning! If you do not release the switch level the application will start immediately after the motor
cool down. Danger of injury!
23. WARNING
Do not assume of your knowledge of the machine.
Remember that a split second of negligence is sufficient to cause serious damage.
3.4- In the event of emergency
Stop immediately the engine.
Assist the injured person with first aid and call for medical assistance as quickly as possible.
IV- GETTING STARTED
Before any intervention on the machine, ensure that safety key is disconnected. All
assembly or adjustment operations described in this chapter must be carried out with the
safety key disconnected.
4.1- Unpacking
- Remove product from its packaging.
- Check that tool and accessories are not damage
4.2- Presentation
The mower is delivered pre-assembled.
However, some elements must be assembled by the user.
4.3- Assembling the lower handlebar
Assemble the 2 lower tubes of the handlebar on the machine using 2 knobs, 1 per side (Fig. 1a, 1b, 1c,
1d & 1e).
Fig. 1a
Fig. 1b
Fig. 1c
Fig. 1d
Fig. 1e
4.4- Assembly of the upper handlebar
Assemble the upper part of the handlebar using 2 screws and 2 knobs. The knobs must be positioned
outwards and the screws facing inwards (Fig. 2a, 2b, 2c & 2d). Hold the wire along its entire length
on the right side of the handlebar using the 2 clips (Fig. 2e & 2f).
