27
27
G
B
E
LECTRICAL SAFETY DEVICES
The installation must be installed according to the current regulations
and laws.
Use the T2 electronic control unit.
For connections and technical data of accessories refer to the
appropriate booklets.
M
AINTENANCE
To be undertaken by specialized staff after disconnecting power
supply.
Clean the wheel contact surfaces carefully once a week.
Check wheel/ground pressure and condition of motor wheels every six
months.
The motor should be overhauled every two years and the oil replaced.
ELECTRIC CONNECTIONS
T2
code BC07086
T2 CRX code BC07085
+
+
-
-
+
AERIAL
COAX
R=2,2KΩ
SIGNAL
BUZZER
+
-
12Vdc for
AUTOTEST EDGE
12Vdc for
ACCESSORY
SUPPLY
PHOTOCELL
EDGE
K BUTTON
PED. BUTTON
COM
CAPACITOR M1
POWER SUPPLY
MOTOR 1
MOTOR 2
CAPACITOR M2
LSO2
LSO1
LSC1
LSC2
BLINKER
LSC1 - limit switch close M1
LSO1 - limit switch open M1
LSC2 - limit switch close M2
LSO2 - limit switch open M2
