RIB ACG9433, Руководство пользователя, Страница: 14 / 24

14
14
G
B
- A -
R
ADIO KEYPAD PROGRAMMING
- Connect AA 3,6V lithium battery - D - cod. SLI0011.
- Remove cover - A - from control panel.
- Insert card - B - cod. ACG9448 in one of the free places.
- Turn on control panel power supply.
- Press and maintain pressed button - C -. You have 5 seconds to digit
the code (min. 4 / max 9 numbers) and confirm pressing button A . You
hear a “BEEP” to confirm the record of the new code.
- Release button - C - .
- Repeat these steps for every new code to record.
- Close cover of the control panel - A -.
S
IGNALS
no “BEEP”s = code to record.
1 “BEEP” = code recorded.
2 “BEEP” = if code is already present in the memory.
3 “BEEP” = after deletion of one code.
4 “BEEP” = during deleting procedure. Code not present in
memory.
5 “BEEP” = memory full (max 125 codes).
10 “BEEP” = All codes deleted.
DELETING ONE CODE
Press and maintain pressed button - C - up to obtain a permanent
“BEEP”.
Digit the code to delete (3 “BEEP” follows to confirm deletion).
Release button - C -.
DELETE ALL CODES
Press and maintain pressed button - C - up to when permanent
BEEEP stops. (10 “BEEP”s follow to confirm total deletion).
Release button - C -.
- B -
code ACG9448
TURN OFF POWER SUPPLY
BEFORE YOU INSERT THE
CARD
RADIO KEYPAD - CONNECTIONS AND PROGRAMMING
FOR SLIDER AUTOMAYTIC DOORS
Channel A
code SLI0011
- D -
- C -