RIB AA51213, Руководство пользователя

Страница: 13 / 16

13
13
G
B
L
OWERING PROCEDURE FOR STOPPER T 275 SEMI-AUTOMATIC
Follow this procedure to lower the bollard:
- Enter the key in the lock situated on the top of STOPPER T bollard.
- Turn the key un-clock wise of 70° and press with the foot in the middle of the crosshead.
- Once fully down, STOPPER T bollard stops automatically and you can take the key out.
R
AISING PROCEDURE FOR STOPPER T 275 SEMI-AUTOMATIC
Follow this procedure to rise the bollard:
- Enter the key in the lock situated on the top of the STOPPER T bollard.
- Press with the foot in the middle of the bollard to easy the mechanical unlock and then turn the key in un-clock wise of 70°; STOPPER T will rise
automatically thanks to the gas spring.
- Once fully down, STOPPER T bollard stops automatically and you can take the key out.
O
RDINARY ROUTINE MAINTENANCE PROCEDURE STOPPER T 275 SEMI-AUTOMATIC
The standard routine maintenance sequence is as follows:
- Cleaning of pit with suction of all material settlements
- Cleaning of water drains located on the pit bottom
- Cleaning and greasing of the central sliding rail
- Testing (and replacement, if needed) of the lower beat gaskets
- General testing of the pop-up element’s screws for correct tightening
- General testing of the lock group
- Cleaning of the cylinder and painting touch-ups (if needed)
- Testing the value (earth resistance) and the earth continuity with loop tester