Rhymebus RM6F5 series, Руководство по эксплуатации

Страница: 78 / 195

Chapter 5 Parameter Setting Description
78
5
5-2 Preset Speed Setup
F_031 Primary Speed
F_032 Preset Speed 1
F_033 Preset Speed 2
F_034 Preset Speed 3
F_035 Preset Speed 4
F_036 Preset Speed 5
F_037 Preset Speed 6
F_038 Preset Speed 7
F_039 Jog Speed
a. Related functions:
(I) The setting of acceleration and deceleration time (F_018 ~ F_20
、
F_027
、
F_029).
(II) The setting of multi-function input terminals (F_052 ~ F_055).
b. Switch of jog speed, primary speed and preset speeds.
※
The ON/OFF conditions as below table are “contact a (N.O)” setting of
functions.
Jog speed
command
Multi-speed level 3
command
Multi-speed level 2
command
Multi-speed level 1
command
Command
Description
ON
X X X
Jog speed
OFF OFF OFF OFF Primary speed
OFF OFF OFF ON Preset speed 1
OFF OFF ON OFF Preset speed 2
OFF OFF ON ON Preset speed 3
OFF ON OFF OFF Preset speed 4
OFF ON OFF ON Preset speed 5
OFF ON ON OFF Preset speed 6
OFF ON ON ON Preset speed 7
Note:
1.
―
X
― : Don’t care
2. The following chart shows jog speed having highest precedence, and jog speed
command is ON, the motor is running at jog speed
3. Jog speed command and the multi-speed commands are programmed by the
multi-function input terminals (X1 ~ X4) by functions (F_052 ~ F055). ON / OFF the
terminal in accordance with above table to switch the speed.
4.
― ON ― :
The terminal is short-circuit at contact a (N.O) setting.
The terminal is open-circuit at contact b (N.C) setting.
― OFF ‖ :
The terminal is open-circuit at contact a (N.O) setting
The terminal is short-circuit at contact b (N.C) setting.
5. The priority of speed command: Jog speed>Multi-sped>primary speed