26
※
Do Not execute the copy for different software version, otherwise the
parameters will occur error and the keypad will display
message.
a-3. (Parameter Copy: Master
Slaves)
Except for two methods described above a1 and a2, It also can use the
operation panel of lead drive, through the control wire copy parameter to other
auxiliary drive. It allows parameter settings to be easily copied from the drive.
Operation steps
Display
1.Through the indicator of lead drive (KEAYPAD) to
distinguish location of lead drive. When the indicator
becomes brighter ,and the inverter represent for the
lead drive.
RUN
CRG
MAIN
SV
PV
2. Press
PROG
key to enter function setting mode.
RUN
CRG
MAIN
SV
PV
3.
Press
▼
or
▲
key to select the function to
F154 (Default Setting)
and then press
FUNC
DATA
key to
enter parameter setting mode.
4. Press
▲
key to select
and then
press
FUNC
DATA
key to copy the parameters.
RUN
CRG
MAIN
SV
PV
5. After completing the copy, the keypad will display
message and automatically back to
function setting mode.
RUN
CRG
MAIN
SV
PV
※
When using copy parameter function, please note F015
、
F016
、
F091
parameter content can’t copy to the slave.
b. Restore Default Value
﹕
RM6F2 series drive provide four default values for using. According to the
demand to restore default values.
(Restore the default value of drive for 60Hz)
(Restore the default value of single constant pressure pump control
application with 60Hz power source)
(Restore the default value of machine tools control application with
60Hz power source)
(Restore the default value of multiple pump constant pressure
control application with 60Hz power source)
(Restore the default value of single pump constant pressure control
application with 50Hz power source)
※
Be cautious of the usage of this parameter! This parameter will clear the saved
setting value via
parameter.
RUN
CRG
MAIN
SV
PV