21
3-2 The Operation of Keypad and Monitor Mode
3-2-1 Operation of Keypad
The operation of the digital keypad includes fault messages and three modes.
The switching methods are shown as below figure:
Monitor mode
Function setting mode
Parameter setting mode
Fault message
FUNC
DATA
PROG
FUNC
DATA
OFF
RESET
PROG
PROG
RUN
CRG
MAIN
SV
PV
RUN
CRG
MAIN
SV
PV
RUN
CRG
MAIN
SV
PV
RUN
CRG
MAIN
SV
PV
Determine one of seven displays as the main display according
to the application. When the parameter of function is completed
without pressing key, the drive will automatically switch back to
the main display after 3 minute
.
The operation steps are shown as below table (by default setting)
Operation Steps
Display
1.Start the drive and enter the monitor mode.
RUN
CRG
MAIN
SV
PV
2.Press
PROG
key and enter the function setting mode.
RUN
CRG
MAIN
SV
PV
3.Press
FUN
DATA
key and enter the parameter setting mode.
RUN
CRG
MAIN
SV
PV
4.Press
FUN
DATA
key and return to the function setting mode.
RUN
CRG
MAIN
SV
PV
5.Press
PROG
key and return to the monitor mode.
RUN
CRG
MAIN
SV
PV
Error message display:
Operation Steps
Display
The fault message displayed during the drive operation
RUN
CRG
MAIN
SV
PV
1.After the error is troubleshooted, press
OFF
RESET
key to
clear the fault and return to the monitor mode.
RUN
CRG
MAIN
SV
PV
3-2-2 Description of Monitor Mode
There are seven displays can be selected in the monitor mode. Press
FUN
DATA