Page 7
11. Place the handrails and handrail
extensions through the openings in
the box.
12. Loosely fasten the front portion of
the handrails to the box using
(2) M10 x 35 Hex Head Bolts and (2)
Flat Washers (red arrow, Bag #2). Do
not overtighten .
13. Loosely fasten the handrail
extensions to the handrails and
the box using (2) M10 x 60
Phillips Head Countersunk Screws,
(2) Flat Washers and (2) Nylock
Nuts (blue arrow, Bag #2). Do not
overtighten .
14. Slide the footplate support brackets
over the handrail extensions until the
holes align. The brackets will cradle
the footplate. Loosely fasten the
brackets and handrail extensions to
the footplate using (2) M10 x 80 Hex
Head Bolts (4) Flat Washers and (2)
Nylock Nuts (black arrow, Bag #3).
15. Install the front seat back cushion
using the Original Hardware.
16. Slide the rear seat bottom onto the underside of the utility box deck until it clicks
into place on the locking tabs (yellow).
