Rhopoint Instruments NG Flex 60, Инструкция по эксплуатации

Страница: 8 / 31

7
Power
The Rhopoint NG Flex 60 is powered by an integrated high capacity lithium ion cell.
Fully charged the instrument will operate continuously for >17 hours or >20,000
readings.
A mains powered USB charger is provided with the instrument . This will fully charge the
instrument
when connected to the unit’s USB input (6) using the USB cable provided in
under 4 hours.
The Rhopoint NG Flex 60 can also be powered and charged using the USB cable
attached to any compatible USB host (e.g. laptop) however due to the lower current
available from these devices the charge time would be a minimum of 6 – 8 hours.
Do not operate the instrument whilst it is charging.
Switching on the unit
To switch on the unit, touch the On/Off button located at the back of the instrument near
the USB socket.
The instrument will display the Rhopoint NG Flex 60 logo and then enter into the home
screen displaying measurement parameters according to the instrument’s default
settings or those previously configured.
Similarly, the instrument can be powered off (dependent on configuration – see
Instrument Setup) by pressing the On/Off button for three seconds.
Label No Function
6 Mains / USB charger
input connector
7 On / Off button
6
7