Rhopoint Instruments NG Flex 60, Инструкция по эксплуатации

Страница: 19 / 31

18
Measurement Screen
The Measurement Screen is used to configure the instruments measurement
parameters to the user’s preference. Pressing the Up and Down buttons navigates
through the options, pressing the Enter button selects that option.
Selectable settings in the Measurement screen are:
Pass/Fail - Displays the Pass/Fail set up screen.
Auto Measure - Enables or disables automatic measurement mode, used for monitoring
surfaces for changes over a period of time. Pressing the Enter button selects the
required measurement frequency of either 2, 5 or 10 seconds. When auto measure
mode is activated a dialogue box is displayed after the Enter button is pressed and
before the beginning of the measurement sequence indicating that it is activated. To
stop auto measure simply press the Enter button once again at any time during the
sequence.
Geometry - The following measurements are selected to be displayed on measurement
screen:

GU/GUh- Both ranges are displayed on the measurement screen.

GU – The standard gloss scale only is displayed.

GUh – The high resolution gloss scale only is displayed.
Pressing the Left button returns the display to the home screen.