RHINO SM72 Скачать руководство пользователя страница 46

16

Operate Safely

Wing And Side Mount Mowers Safety Practices

Raised wing positions reduce shielding protection and 
increases the thrown object and blade contact hazard 
risks.

Avoid possible serious injury or death by thrown 
objects or blade contact from raising and lowering 
wings during mowing operations:

— Do not mow with bystanders within 300 ft (92 m) of 

the mower.

— Be sure no one is near mower while raising or 

lowering wings.

— Shut off the PTO and wait for all rotating elements to 

stop before raising the mower deck or wing section. 

— Only raise wing to clear objects in the mowing path 

or to match ground slope.

— Lower raised wing to ground after clearing object or 

ground slope conditions.

— Stop mowing if anyone approaches within 300 ft 

(92 m) of mowing area.

Ditch Bank Mowing Safety Practices

Use extreme care when mowing ditch banks. Watch for 
washouts, eroded areas and mowing obstructions along 
the ditch banks. Hitting obstructions with side-mount 
or boom mowers may swerve the tractor’s front end 
toward the ditch.

Avoid Hitting 
Obstructions

Keep Bystanders 

Away from 

Mowing Area

300 ft 

(92 m)

Operate Safely

Raised wing and boom mower ditch bank operations may 
reduce the mower’s thrown object shielding effectiveness 
for the mower operator’s protection.
— Use enclosed ROPS cabs, special protective 

enclosures and other operator shielding available from 
the manufacturer when performing these operations.

— Inspect mowing area and remove or mark all foreign 

objects and debris to be avoided by mower.

Uneven Terrain Mowing Safety Practices

Tractor and mower stability is reduced on slopes and 
uneven terrain.

As in all conditions when mowing, use tractors 
equipped with ROPS and seat belt. 

Make sure the 

ROPS are raised and locked in place and always 
wear your seat belt.

Prevent tractor and mower overturns and maintain 
equipment stability control:
— Review tractor and mower operator’s manuals for 

operating safety practices on slopes and uneven 
terrain conditions. Explain the practices to those 
users and operators who cannot read.

— Avoid extremely steep slope operations.

Read and 

Understand 

Manuals Before 

Operating

Use 

Enclosed ROPS 

Cabs or Protective 

Enclosures

Use ROPS 

and Seat Belt

Содержание SM72









































































































































Отзывы: