RHINO SM72 Скачать руководство пользователя страница 106 | Manualshive

Страница: 106 / 136

RHINO SM72 Скачать руководство пользователя страница 106

OPERATION

SM72 02/10

Operation Section 4-14

© 2012 Alamo Group Inc.

OPERA

T

ION

•

Ensure the Manual Canister is secured to the
mower and contains the Operator’s Manual.

•

Ensure all decals are in place and legible.
Replace missing, worn, and non legible
decals.

NOTE: The mower operator’s manual and affixed
decals contain important instructions on the safe
and proper use of the mower. Maintain these
important to ensure the features on the mower in
good condition to ensure the information is
available to the operator at all times.
OPS-SS-0004

•

Ensure the mower is securely attached to
the skid steer mounting plate and the latch
pins are engaged.

•

Ensure the height limiting safety chain is
correctly secured and connected between
the mower and skid steer chassis.

•

Check that the driveline is securely attached
to the tractor and the locking collar is seated
in the groove of the PTO shaft.

OPS-SS-

0018

•

Ensure chain guards and rubber deflectors are
in position and not damaged. Replace worn,
broken, and missing sections immediately.

•

Inspect that all bolts and screws are in position
and are properly torqued.

OPS-SS-0019

«
...
104
105
106
107
108
...
»

Содержание SM72









































































































































Отзывы:

Нет отзывов