RHINO SM72 Скачать руководство пользователя страница 129

Страница: 129 / 136

MAINTENANCE

SM72 02/10

Maintenance Section 5-5

MAINTENANCE

BLADE SHARPENING

Always sharpen both blades at same time to maintain balance. Follow original sharpening pattern as shown in

Image Mnt-R-0008.

Always sharpen blades by grinding. DO NOT heat and pound out edge. Do not sharpen

blade to a razor edge, but leave a 1/16” blunt edge. Do not sharpen back side of blade.

Avoid personal injury. Always block the mower up to prevent if from falling when the blades
and/ or carrier are being serviced.

Avoid personal injury. Always wear safety glasses and face protection when grinding blades.

Replace bent or broken blades with new blades. NEVER ATTEMPT TO STRAIGHTEN,
WELD, OR WELD HARDFACING ON BLADES SINCE THIS WILL LIKELY CRACK OR
OTHERWISE DAMAGE THE BLADE WITH SUBSEQUENT FAILURE AND POSSIBLY
CAUSE SERIOUS INJURY FROM THROWN BLADES.

(SGM-10)

Blade Maintenance

Содержание SM72









































































































































Результаты поиска

Содержание SM72

Отзывы:

RHINO SM72, Руководство оператора, Страница: 129 / 136

Результаты поиска

Содержание SM72

Отзывы: