Rhin-O-Tuff HD6500, Инструкция

Страница: 15 / 28

Adjust the APES System Ejector Base Plate Assembly back against the front of the punch.
Notice the Rear Paper Guide on each side of the machine in Figure L & M;
The Rear Paper Guide should be centered between both HD-7700 side plates and rest against
the front of the HD-7700 top front cover. Locate the APES System into this position without
bending the Rear Paper Guide forward.
Install and tighten the two 3-winged mounting knobs provided into the last (rear) mounting slots.
See Figure N.
Mounting Continued.....
Move the APES System Reception Assembly next to the punch. See Figure N. Note that the
Reception Pivot Block will align centered about the Ejector Base Plate Reception Mounting Bar as
shown. See Figure O.
6500/7000 7700
13
Figure L
Figure M
Figure N
Figure O