Rhin-O-Tuff HD6500, Инструкция

Страница: 13 / 28

Your APES System came with two required Interface Blocks (Figure I page 9) that are 9” long by
¾” Square, and four ¼-20 X 1-1/4” socket head cap screws, and an allen wrench.
On each side of the punch locate the top most and two forward most Allen screws and remove
them (use the short side of the allen wrench for leverage and turn counter clockwise). See Figure I
for location.
Orient the Interface Block with the oval hole forward (shown in figure I), and round hole to the rear
of machine. Make sure the counter bores in the blocks face outward. See the counter bore
example in Figure J.
Attach the rear Allen screws first ; use the provided longer screws to attach the block securely
and repeat for the other side of machine.
11
Figure H
Figure I
Figure J