Rhima DEKO 190iX, Руководство оператора

Страница: 19 / 40

Start the cycle
Start the wanted cycle by pressing the start icon key or the key with the name on next page.
If needed, by pressing “ the name ” or
“square” key, the steps and variables
of the cycle can be checked.
NOTE! The cycle variables i.e. temperatures, times and chemical dosage volumes, are pre-set
and cannot be adjusted prior to, or during the cycle. Possible changes to the pre-set cycles may
only be made by using a special code and into the cycle set-up.
If the machine is unused for a period of
ten minutes it will go into standby mode.
By pressing the
“CONTINUE” key this will
bring the machine out of standby and
open the door interlock (manual door).
19