Rheem 340SS, Руководство пользователя и инструкции по установке, Страница: 11 / 52

SAFETY, WARNINGS, INSTALLATION NOTES
11
INSTALLATION NOTES
This water heater must be installed:
•
by a qualified person,
•
in accordance with the installation instructions,
• in compliance with the Plumbing Standard AS/NZS 3500.4,

This water heater is suitable for outdoor installation only.

This water heater is intended to be permanently connected to the water
mains and not connected by a hose-set. A braided flexible hose or semi-
flexible connector may be used for connection to the water heater, where
permitted by AS/NZS 3500.4.
•
in compliance with the Gas Installations Standard AS/NZS 5601.1, and
•
in compliance with all local codes and regulatory authority requirements.
Installation and commissioning requirements and details for the installing
plumber are contained on pages 26 to 47.
Mains pressure water supply
The water heater is designed to operate at mains pressure by connecting directly
to the mains water supply.
The water heater is supplied with a temperature pressure relief valve with a
pressure rating of 1400 kPa. If an expansion control valve has been installed on
the cold water line to the water heater, this should have a pressure rating of
1200 kPa.
The maximum mains water supply pressure for the water heater is 1120 kPa if
an expansion control valve is not installed, or 960 kPa if an expansion control
valve is installed. If the mains supply pressure in your area exceeds these values,
a pressure limiting valve must be installed.
The supply pressure should be greater than 350 kPa for true mains pressure
operation to be achieved.
Securing of the water heater
It is recommended the top of the water heater be secured to the wall or screen
with the wall brackets provided using fasteners suitable for the wall or screen
type and application. Refer to “Wall Bracket” on page 30 for additional
information.