G R A M E R C Y S I N G L E M E T A L W A S H S T A N D
STONE TOP INSTALLATION
Caution! Installation between two walls requires special care.
If installing Stone Top between two walls, stop here and follow the next set of instructions.
Standard Stone Top Installation Guidelines
Stone Top Installation Between Two Walls
1. Apply a continuous bead of sealant to the top face of the Sink Basin [C] rim where the Stone Top [A]
makes contact with the basin.
2. Using a two-man crew, lift stone top and set in on top of the Vanity Base [D].
3. Apply Silicone sealant at the seam where Backsplash [B] meets the wall.
4. Adjust set screws as needed for stability of the washstand, continuing to take care not to over-tighten,
1. Apply a continuous bead of sealant to the top face of the Sink Basin [C] rim where the Stone Top [A] makes
contact with the basin.
2. Using a two-man crew, lift stone top and set it's rear edge on the back of the Vanity Base [D]
(closest to rear wall) -- see below illustration.
3. Lower front of Stone Top onto the vanity base, making sure both ends are lowered at the same rate.
4. Do not shimmy, twist, or turn the stone top while lowering as this increases the risk of breakage.
5. Apply Silicone sealant at the seam where Backsplash [B] meets the wall.
6. Adjust set screws as needed for stability of the washstand, continuing to take care not to over-tighten,
7
OF 10