G R A M E R C Y S I N G L E M E T A L W A S H S T A N D
1
5
.
1
6
.
1
7
.
SCREW DRIVER
BASIN
STONE TOP
ASSEMBLY INSTRUCTIONS
CONT'D
:
Apply a continuous bead of sealant to the top surface of the rim of the basin (B) where it will contact the underside of
the stone top. Position the basin in its final location upside down on the underside of the stone top. Overflow of the
basin should be on the same side as pre-drilled faucet holes on the stone top.
Place four “L” brackets (N) with long sides over the basin rim and insert screws (P) through washers (O) and “L”
brackets. Screw into calk-in anchors with a screwdriver. (See illustration.) (Do not over-tighten.) Ensure that the
basin is securely attached to the stone top.
Using two people, turn stone top with attached basin over and position carefully on top of washstand base.
6
OF 10