RGBlink VSP 5360 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 85

background image

VSP 5360 User Manual

4

Operators Safety Summary

The general safety information in this summary is for operating personnel.

Do Not Remove Covers or Panels

There  are  no  user-serviceable  parts  within  the  unit.  Removal  of  the  top  cover  will  expose  dangerous
voltages.  To  avoid  personal  injury,  do  not  remove  the  top  cover.  Do  not  operate  the  unit  without  the
cover installed.

Power Source

This  product  is  intended  to  operate  from  a  power  source  that  will  not  apply  more  than  230  volts  rms
between  the  supply  conductors  or  between  both  supply  conductor  and  ground.  A  protective  ground
connection by way of grounding conductor in the power cord is essential for safe operation.

Grounding the Product

This product is grounded through the grounding conductor of the power cord. To avoid electrical shock,
plug the power cord into a properly wired receptacle before connecting to the product input or output
terminals. A protective-ground connection by way of the grounding conductor in the power cord is
essential for safe operation.

Use the Proper Power Cord

Use only the power cord and connector specified for your product. Use only a power cord that is in good
condition. Refer cord and connector changes to qualified service personnel.

Use the Proper Fuse

To avoid fire hazard, use only the fuse having identical type, voltage rating, and current rating
characteristics. Refer fuse replacement to qualified service personnel.

Do Not Operate in Explosive Atmospheres

To avoid explosion, do not operate this product in an explosive atmosphere.

Installation Safety Summary

Safety Precautions

For all VSP 5360 processor installation procedures, please observe the following important safety and
handling rules to avoid damage to yourself and the equipment.
To protect users from electric shock, ensure that the chassis connects to earth via the ground wire
provided in the AC power Cord.
The AC Socket-outlet should be installed near the equipment and be easily accessible.

Unpacking and Inspection

«
...
3
4
5
6
7
...
»

Содержание VSP 5360






















































































Отзывы:

Нет отзывов

Похожие инструкции для VSP 5360

Бренд: ICP DAS USA Страницы: 14

Бренд: ICP DAS USA Страницы: 25

Бренд: ICP DAS USA Страницы: 15

Бренд: ICP DAS USA Страницы: 8

Бренд: TC Electronic Страницы: 55

Бренд: Black Box Страницы: 9

Бренд: FONESTAR Страницы: 8

Бренд: WABCO Страницы: 29

Бренд: Quantum Страницы: 7

AT32F421 Series

Бренд: ARTERY Страницы: 337

Бренд: Idis Страницы: 22

Бренд: Doremi Страницы: 15

Бренд: Microtek Страницы: 25

Бренд: Neousys Technology Страницы: 24

POD-51EH-C541U-12

Бренд: IceTech Страницы: 8

Бренд: Intel Страницы: 154

Secure Site Manager 16

Бренд: Black Box Страницы: 16

Бренд: SIIG Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды