Chapter 3: Using Your Product
VSP 5360 User Manual
29
3.5 Single Image Switching
VSP 5360 can realize seamless effects switch between two channels, select the signal in PRE area,
then push [CUT] or [TAKE] button, the signal will be switched to LED display.
For example, switch VGA1 to LED display, first push the [VGA1] button in PRE area, then push
[CUT] or [TAKE] button, and the LED display will show VGA1 signal.
Default the switch time is 1 seconds for [TAKE] button, if need to adjust the fade in fade out time,
push [MENU] button and enter to the menu items, turn the knob, select <SYSTEM>, push the
knob to confirm. Turn the rotary knob, select <TRANSITION>, and set the fade time, push the
[TAKE] button again, the signal will be switched to the LED display with the adjusted time.
User can also switch the signal by pushing the signal button in PRO area, but the signal in monitor
will not change.