VSize
：
set the vertical size of the image;
HPos
：
set the horizontal position of the image;
VPos
：
set the vertical position of the image
；
User can set size and position of the screen
simply, Mainly applies to LED
screens users. After setting screen parameter
，
the user choice PIP or PBP
operation, display picture can directly shows on corresponding screen
。
Output
>1024x768x60
Push the / to enter Single or Dual channel menu , push the UP / DOWN to
select the single or dual channel, push SEL to confirm the single channel or dual
channel work state;
Setup
Dual
Setup
Single
Select the input channel, push the UP/DOWN, and SEL to confirm the
different input channel. User can also push the channel name on the
keyboard to go into the input channel.
Source Select
>CV1
AB in VSP 516 is used to enable channel if dual channel mode.
Setup
A on B
OR
：
Setup
A on B
Push SCALE to set the size and position of the image, push UP/DOWN and
VSP 516 Series User Manual 14
