DVI
: Switch to DVI input
+
:Switch to amplify the audio;
-
:Switch to down scale the audio;
SDI: SDI input, compatible with HD/SD SDI, push to switch to SDI input;
Note:
VSP 516S can install a SDI input module to support SD-SDI and
HD-SDI signal, compared to VSP 516 and VSP 516H.
PBP:
Switch to show two pictures in side by side mode;
Note:
VSP516S front panel remove PBP mode button to SDI button;
VSP516 and VSP516H front panel keep PBP mode button, but
remove SDI button.
PIP
:Switch to show picture in picture on the screen. CV1 is the default
small picture on the top left corner, DVI is the default picture with full screen.
SAVE1
：
switch to use the user-defined mode 1;
SAVE2
：
switch to use the user-defined mode 2;
SAVE3
：
switch to use the user-defined mode 3;
FS
：
switch to selet full screen or zoom view, just for single picture mode;
RATIO
：
switch to select aspect ratio 4
：
3 or 16
：
9;
MSA
：
switch to select the audio channel which send to output in multi
picture mode;
MUTE
：
Switch to select mute sound or return;
MENU
:push to go to main menu;
FRE:push to freeze the video image or live again;
（
Freeze
Æ
Live
Æ
Freeze
）
AB
: Channel Switch, only works under the PBP mode. Push it to switch between
VSP 516 Series User Manual 10
