DTR_106-01-02-001_EN_b
5
5.
Installation of the device
The properly installed device should be mounted with the horn and the leads facing down (Fig. 4).
Fig. 4
NOTICE!
Before you begin any installation operations or start using the device, you should refer to the manual supplied
by the manufacturer. Improper connection to the mains power supply, incautious device installation, or
improper use may cause property damage. Moreover, any failure to follow the manufacturer's instructions may
void your warranty.
NOTICE!
Keep in mind that all the components should be mounted with the leads facing down.
NOTICE!
It is forbidden to make any additional mounting points or any holes both in the device assembly components and the
device itself.
5.1
Industrial acoustic signalling device of increased volume of 108 dB
The device is used for acoustic signalling of the programmed events such as, for example, clock alarms. The
device is fully compatible with the RGB Technology products enabling this kind of signalling.
5.2
Signalling device connection
The diagram below shows an illustrative connection to the ZA5 clock in accordance with product code 301-01-
01-001.
NOTICE!
Before making the connection, make sure that the signalling device is disconnected from the mains power
supply. If you have any problems, please contact the RGB Technology technical support.
