manualshive.com logo in svg

RGB Lights FlexiFlex, Руководство пользователя, Страница: 2 / 24

Поделиться
Скачать
RGB Lights FlexiFlex Скачать руководство пользователя страница 2

This product is for professional use only. It is not for household use.

This product presents risks of severe injury or death due to fire hazards, electric shock and falls.

Read this manual before installing, powering or servicing this product, follow the safety precau-

tions listed below and observe all warnings in this manual and printed on the product. If you 

have questions about how to operate the product  safely.

PROTECTION FROM ELECTRIC SHOCK

• 

Shut down power to the entire installation at the building’s main power distribution board and lock 

out power (by removing the fuse for example) before carrying out any installation or maintenance 

work.

• 

Disconnect the product from AC power before removing or installing any cover or part and when 

not in use. 

• 

The total current draw of all devices connected in a chain via one product’s power input socket, 

including that product, must not exceed 20 amps.

• 

Before using the product, check that all power distribution equipment and cables are in perfect 

condition and rated for the current requirements of all connected devices.

• 

The outlet used to supply the product with power must be installed near the product and easily ac-

cessible so that the product can easily be disconnected from power.

• 

Connect this product to AC power using only a power cable that is listed, minimum 12 AWG or 3 x 

2.5 mm2, SJT or better. Suitable cable jacket types include ST, SJT, STW, SEO, SEOW and STO.

• 

Connect this product to AC power using only listed power connectors rated 20 A minimum.

• 

Always ground (earth) the product electrically.

• 

Use only a source of AC power that complies with local building and electrical codes and has both 

overload and ground-fault (earth-fault) protection.

• 

Do not use the product if the power cable or power plugs are in any way damaged, defective or 

wet, or if they show signs of overheating.

• 

Do not expose the product to rain or moisture.

•Refer any service operation not described in this manual to a qualified technician.

2

Содержание FlexiFlex

























Отзывы:

Нет отзывов