manualshive.com logo in svg

RFL Electronics RFL 3000 4K24C, Инструкция по установке и эксплуатации

Продукт RFL Electronics RFL 3000 4K24C - это мощное устройство, которое предлагает высокое качество звука и изображения. Для удобного настройки и использования, мы предоставляем бесплатное Руководство по установке и использованию на нашем сайте. Скачать его можно на manualshive.com.

Поделиться
Скачать
background image

3.2.4  Connecting Twisted Pair (RJ-45,CAT3, CAT5, Unshielded or Shielded)

 

The RJ-45 ports of the RFL 3000 4K-Series can be connected to the following 

two media types: 100BASE-TX and 10BASE-T.  CAT 5 cables should be used when 
making 100BASE-TX connections. When the ports are used as 10BASE-T ports, CAT 3 
may be used.  In either case, the maximum distance for unshielded twisted pair cabling is 
100 meters (328 ft).

 

Media 

               

IEEE Standard          Connector 

Twisted Pair (CAT 3, 4, 5)   10BASE-T 

          RJ-45 

Twisted Pair (CAT 5)  

 100BASE-TX

RJ-45            

NOTE :   It is recommended that high quality CAT. 5 cables (which work for both 10 Mb 

and 100Mb) be used whenever possible in order to provide flexibility in a mixed-
speed network, since dual-speed ports are auto-sensing for either 10 and 
100Mb/s.

  

The following procedure describes how to connect a 10BASE-T or 100BASE-TX 
twisted pair segment to the RJ-45 port. The procedure is the same for both unshielded 
and shielded twisted pair cables. 

1. Using standard twisted pair media, insert either end of the cable with an RJ-45 plug

into the RJ-45 connector of the port. Note that, even though the connector is
shielded, either unshielded or shielded cables and wiring may be used.

2. Connect the other end of the cable to the corresponding device

3. Use the LINK LED to ensure proper connectivity by noting that the LED will be

illuminated when the unit is powered and proper connection is established.

3.3      Rack-mounting 

Installation of a RFL 3000 4K24 Switch in a 19” rack is a simple procedure. The 

units are 1U (1.70”) high. When properly installed, the front-mounted LED status 
indicators should be in plain view and easy to read. Rack-mount installation requires 
special “19” rack-mounted brackets and screws (included with each 4K24 unit). The 
brackets attach to the front sides of the Switch, which is then fastened into a standard 19” 
RETMA rack.

 

2X          4X       6         8             10         12       14          16          18          20        22       24

 1 X        1         3         5           7            9          11         13         15          17         19        21         23

Magnum 4024F Switch

100M

Col/FDX

Link/Act

Power

100M

Col/FDX

Link/Act

TX                  X           

          TX              RX

Содержание RFL 3000 4K24C











































Отзывы:

Нет отзывов

Похожие инструкции для RFL 3000 4K24C

D-Link DSL-2750U Setup preview
DSL-2750U
Бренд: D-Link Страницы: 14
D-Link DVG-7022S Quick Installation Manual preview
DVG-7022S
Бренд: D-Link Страницы: 7
D-Link DIR-878 Quick Installation Manual preview
DIR-878
Бренд: D-Link Страницы: 41
Tandberg Data Storagelibrary T24 Manual preview
Storagelibrary T24
Бренд: Tandberg Data Страницы: 28
Dialogic DM/IP601-CPCI-100BT Quick Install Card preview
DM/IP601-CPCI-100BT
Бренд: Dialogic Страницы: 2
TP-Link Archer MR500 User Manual preview
Archer MR500
Бренд: TP-Link Страницы: 110
TDK InvenSense RoboKit1 Hardware Reference Manual preview
InvenSense RoboKit1
Бренд: TDK Страницы: 13
Lutron Electronics Smart Bridge Quick Start Manual preview
Smart Bridge
Бренд: Lutron Electronics Страницы: 4
Aewin Technologies SCB-9651 User Manual preview
SCB-9651
Бренд: Aewin Technologies Страницы: 86
i-MO OptiBond 210 C Series Hardware Installation Manual preview
OptiBond 210 C Series
Бренд: i-MO Страницы: 16
Matrix Switch Corporation MSC-1HD1608L Product Manual preview
MSC-1HD1608L
Бренд: Matrix Switch Corporation Страницы: 60
Behringer B-Control Fader BCF2000 Quick Start Manual preview
B-Control Fader BCF2000
Бренд: Behringer Страницы: 13
Linksys WRK54G User Manual preview
WRK54G
Бренд: Linksys Страницы: 80
Digital Equipment ChannelWorks Network Installer Manual preview
ChannelWorks
Бренд: Digital Equipment Страницы: 90
Idis DR-8416 Quick Manual preview
DR-8416
Бренд: Idis Страницы: 40
IBM EM78P221/2N Specification preview
EM78P221/2N
Бренд: IBM Страницы: 70
Tenda W268R User Manual preview
W268R
Бренд: Tenda Страницы: 74
H3C RA5100 Manual preview
RA5100
Бренд: H3C Страницы: 11

Бренды по названию

Популярные бренды

Загрузить еще бренды