Accessories
Specifications
Specifications
Power
AC120V DC5V/500mA
Power
I
Battery
3- AA Alkaline battery
Battery lifetime *1
Normal use: Approx. 8-10 months
In storage: 28 months
(operation under low battery condition is 10 days)
Alarm time delay setting
0/ 1 / 2/ 4seconds
Volume setting
High, Medium, Low/Silent
Hold button
Reset alarm /30 seconds pause
Melody/Tone/ Voice Switch
4 positions - Melody only, Tone only,
Voice, Tone + Voice
Melody/Tone select
Melody/Tone select button, choice between 8
different melodies and 8 different tones.
¼ inch mono-phone jack
Input-voltage rating : 50V
Nurse call jack
Input current : 500mA
On resistor: 2.50
Bed/ Chair sensor
Connector : R
J
11jack
Bed / Chair Sensor resistance Less than 1 Ok ohm
Floor sensor
Connector : ¼ inch mono-phone jack
Floor Mat Sensor resistance less than 3k ohm
Size (WxDxH)
70mm x 27mm x 113mm
Water protection classification
IPXO
Weight*2
Approx. 177g
*1
24Hrs. (Alarm: 20sec., volume max., 5 times/day)
*2
Without protective silicon boot, with batteries
The SENSATEC ST750 monitor can be used with the following SENSATEC sensor pad and mats:
Sensor Pads
• RFT#l000-1801 - 30 Day Bed Pad
• RFT#l000-1802 - 90 Day Bed Pad
• RFT#l000-1803 - 180 Day Bed Pad
• RFT#l000-1805 -30 Day Chair Pad
• RFT# 1000-1806 - 90 Day Chair Pad
• RFT# 1000-1807 - 180 Day Chair Pad
• RFT#I000-1830 - I Year Floor Mat
• ST750-ADAPTER UL (RFT # 0180-0068) - AC 100-240V DC5V /1 000mA Power adapter (Model Number: GS2U-006-050-A)
Page 12 of 12
ST750 Instruction Manual (0510-0496-
C
)
