Selecting a Tone for the Alarm
Tone starts and continues sounding when you press
and hold the Sound select button. Release the button
and then press the button again to listen to the next
Tone. Repeat u
n
til you decide which Tone to use.
Tone
•
Pi-Pi- Pi-Pi-
•
PuPi- PuPi-
•
PuPi-PuPi-PuPi-
•
PuPiPiPuPiPi
•
Pi--- Pi Pi
•
Pi Pi Pi Pi
•
PiPi- PiPi-
•
PiPiPi PiPiPi
To Turn Off the ST710
1. Press the Hold button.
2. Unplug the sensor.
3. The unit will turn off in 30 seconds.
� Dispose of Properly
-
If you no longer use the device or its accessories,
dispose of according to the local regulations in force.
ST710 Instruction Manual (0510-0519-
B
)
Mounting Attachments
The ST710 can be fitted with the following attachments:
Strap
The strap is attached to the ST710 through a strap hole and
can be attached to a bed, chair or handrail.
Mounting Clip
The ST710 unit can be attached to the wall or chair through
a stainless steel wheelchair clip or wall mounting bracket.
Strap hole
Strap
Clip mounting unit
I
��
D
Chair clip
Wall mount clip
Alarm Indicators
LED status
Indicates unit is in
Solid GREEN
30 second hold
Flashing RED
Alarm
twice per second
Blinking RED
Low Battery state.
every
5
seconds
When using batteries, the ST710
will alarm every 15 second and the
red LED will blink every
5
seconds. Replace the battery as
soon as possible when the Low
Battery is indicated.
Flashing Green
Unit is monitoring a patient.
every 3 seconds
Page 9 of 11
