Rf-t Kamouflage 120 MP, Руководство пользователя

Страница: 21 / 26

21
Installation
Installation into vertical shaft DESENFIRE (HD) with built-in mounting frame
The product was tested and approved in:
Product Range Wall type Classification
Kamouflage 60 MP 350x385 mm ≤ Kamouflage 1V MP ≤ 700x1075 mm Shaft Desenfire HD ≥ 25 mm HD EI 60 (v
ed
i
n
o) S 1500 C10000 AA multi
Kamouflage 120 MP 350x385 mm ≤ Kamouflage 1V MP ≤ 700x1075 mm Shaft Desenfire ≥ 25 mm THD EI 90 (v
ed
i
n
o) S 1500 C10000 AA multi
Kamouflage 120 MP 350x385 mm ≤ Kamouflage 1V MP ≤ 700x1075 mm Shaft Desenfire HD ≥ 35 mm EI 120 (v
ed
i
n
o) S 1500 C10000 AA multi
Kamouflage 120 MP 350x385 mm ≤ Kamouflage 1V MP ≤ 700x1075 mm Shaft Desenfire ≥ 45 mm
EI 120 (v
ed
i
n
o) S 1500 C10000 AA multi
e
≥ 125 mm
KAMOUFLAGE MP
EASY-KAP ME/MP
e
A = 2 x e + 20 mm
(W+
A
) x (H+
A
) mm
(W+
20) x (H+
20) mm
1. Coat the edges of the opening with adhesive plaster, type
FACILIS.
Seal the joints between uprights and cross pieces and between
the lining and the wall with vegetable fibre caulking and
plaster.
Two fixing lugs are provided at the bottom and at the top of
the mounting frame: fold these against the sleeve. Caulk the
mounting frame to the duct with vegetable fibre and taking
care not to misshape it. The finished opening must be the same
size as the mounting frame (W+10) x (H+10) mm.
Installation into vertical shaft DESENFIRE (HD) (without a mounting frame)
The product was tested and approved in:
Product Range Wall type Classification
Kamouflage 60 MP 350x385 mm ≤ Kamouflage 1V MP ≤ 700x1075 mm Shaft Desenfire HD ≥ 25 mm HD EI 60 (v
ed
i
n
o) S 1500 C10000 AA multi
Kamouflage 120 MP 350x385 mm ≤ Kamouflage 1V MP ≤ 700x1075 mm Shaft Desenfire ≥ 25 mm THD EI 90 (v
ed
i
n
o) S 1500 C10000 AA multi
Kamouflage 120 MP 350x385 mm ≤ Kamouflage 1V MP ≤ 700x1075 mm Shaft Desenfire HD ≥ 35 mm EI 120 (v
ed
i
n
o) S 1500 C10000 AA multi
Kamouflage 120 MP 350x385 mm ≤ Kamouflage 1V MP ≤ 700x1075 mm Shaft Desenfire ≥ 45 mm EI 120 (v
ed
i
n
o) S 1500 C10000 AA multi
KAMOUFLAGE MP
e
≥ 125 mm
e
A = 2 x e + 10 mm
(W+
A
) x (H+
A
) mm
(W+10) x (H+10) mm
1. Coat the edges of the opening with adhesive plaster, type
FACILIS.
Seal the joints between uprights and cross pieces and between
the lining and the wall with vegetable fibre caulking and
plaster.
1
1