6
Move the mouse to highlight
Configuration
then select
Network Settings
.
The Network Settings page, above, allows you almost full function TCP/IP Network Access.
For typical setup, you might modify IP Address and the Default Gateway and Subnet Mask.
If you have several RF Mogul Systems, you can name each system by changing the Device Name.
The Device Name will be viewable in the Top Frame of every HTML Page under the Satellite
Antenna Controller. (see above)
If additional security is required the IT Administrator can lock this system down with Network
Name, User Name and Administrator Password. Before exiting this page if a username and
password have been added you should document these changes for future requirements.
After all changes are completed re-verify the modifications and then select the APPLY located in
the top right of this page. The system should return to the Main Status Page after updating.
