RF Code R151 Скачать руководство пользователя страница 3

PN01805 REV00 

R151 Tethered Temperature Sensor  Installation Guide

 

3

Preface

Trademarks

RF Code

TM

 and the RF Code logo are trademarks of  RF Code, Inc. All other product names are copyright and registered 

trademarks or trade names of  their respective owners. 

Copyright Statement

Copyright 

©

 2011 RF Code, Inc. All Rights Reserved. 

This document, as well as the hardware and firmware described therein, are furnished under license and may only be 
used or copied in accordance with the terms of  such license. The information in these pages are furnished for informa-
tional use only, are subject to change without notice, and should not be construed as a commitment by RF Code, Inc. RF 
Code assumes no responsibility or liability for any errors or inaccuracies that may appear in these pages. 

RF Code reserves the right to make changes without further notice to any products herein. RF Code makes no war-
ranty, representation or guarantee regarding the suitability of  its products for any particular purpose, nor does RF Code 
assume any liability arising out of  the application or use of  any product, and specifically disclaims any and all liability, 
including without limitation consequential or incidental damages.

The user of  this system is cautioned that any changes or modifications to this system, not expressly approved by RF 
Code, Inc., could void the warranty.

Every effort has been made to supply complete and accurate information. However, RF Code assumes no responsibility 
for its use, or for any infringements of  patents or other rights of  third parties, which would result.

RF Code, Inc.
9229 Waterford Centre Blvd. 
Suite 500 
Austin, TX 78758
www.rfcode.com

Содержание R151
















Отзывы: