Page 7
The Suspended Oil fired Unit Heater range conform to the following harmonised standards:
BS EN 292-1
Safety of Machinery - Basic Concepts, General Principles for Design Basic terminology, methodology BS EN 292-2
BS EN 292-2
Safety of Machinery - Basic Concepts, General Principles for Design Technical Principles and Specifications
BS EN 60204-1
Safety of Machinery - Electrical Equipment for Machines Specification for General Requirements
BS EN 60335-1
Safety of Household and Similar Electrical Appliances General Requirements
BS EN 55014
Limits and methods of measurement of radio disturbance characteristics of electrical motor-operated and thermal
appliances for household and similar purposes, electrical tools and similar electric apparatus
BS EN 50165
Electrical Equipment of non-electric heating appliances for household and similar purposes, safety requirements
1.2 Certificates of conformity
Certificates of conformity are available from the manufacturer, address details are shown on the back page.
1.3 General product information
The Suspended Oil fired Unit Heater range have an output range from approximately 40.0 kW to 103kW. Each heater
must be connected to its own individual open flue.
Each heater is fitted with a forced draught burner which has been test fired and pre-set prior to despatch. The safety
functions of the burner are by way of a fully sequential control box fitted to the burner.
Neither asbestos nor soft soldered joints are used in the construction or manufacture of the Suspended Oil
fired Unit Heater range. The materials selected for use can withstand the mechanical, chemical, and thermal
stresses which they will be subject to during foreseen normal use when installed in accordance with the
manufacturers recommendations.
1.4 General requirements
CAUTION
Ensure the fuel supply is in accordance with the manufacturer’s recommendations and is as stated on the
appliance data plate.
CAUTION
Installation, commissioning, and servicing must only be carried out by appropriately qualified and competent
persons.
WARNING
Unauthorised modifications to the appliance, or departure from the manufacturers guidance on intended use,
or, installation contrary to the manufacturers recommendations may constitute a hazard.
To ignore the warning and caution notices, and to ignore the advice from the manufacturer on installation,
commissioning, servicing, or use, will jeopardise any applicable warranty, moreover, such a situation could
also compromise the safe and efficient running of the appliance itself, and thereby constitute a hazard.
Содержание OUH 100
Страница 46: ...Page 46 Notes...
