0505T2D0GBEN
14/21
8.14 Clean burners and gas jets with soft brush and
compressed air. To prevent damage, do not use hard
objects for cleaning the gas injectors
8.15 If anchor lines of service panels are removed during
servicing, they must be refitted upon completion of the
service.
8.16
Upon completion of any service work it is necessary to
re-commission the appliance in accordance with the
step procedure described in section 7.7.2 of this
document.
Fig. 9 SERVICE ACCESS KEYS Fig.10 IGNITER ASSEMBLY
Fig. 11
REMOVAL OF COMBUSTION AIR FAN (VENTER) MOTOR FAN IMPELLER ASSEMBLY
CRITICAL DIMENSIONS
8.15 TO REMOVE COMBUSTION AIR FAN:
1.
Disconnect electrical connections to fan motor.
2.
Remove motor and venter wheel (3 screws).
3.
Withdraw motor/impeller assembly sideways.
4.
Clean venter housing.
5.
Check, clean or replace motor and/or venter wheel.
6.
Replace in reversed order after checking critical
dimensions (fig. 11)
