PAGE 18 Reznor, AB - 2 Gas, GB 2019-08, D301177 Issue A
• Burner tubes
Remove burner tubes by disconnecting the
clamping plate. Remove hereto the screws as
described in figure 31.
• Air pressure switch
Release the electric panel as described in 8.2.1.
Remove the silicon tubing at the top of the air
pressure switch as shown in figure 32.
NB: only a single tube is fitted to the air pressure
switch on the negative pressure side.
Remove now the electrical connections. Remove
hereto the protection cap. Then connections can
be disconnected. See figure 33 and 34.
Part Replacement (Cont)
Figure 31.
Figure 32.
Figure 33.
Figure 34.
