X
X
X
X
X
X
X
X
137-1/2" Wall Frame
140-1/2 Wall Panel
Do Not Nail Edge
2.
Cut (6) six 2x4-11" blocks from
another 8' long 2x4.
3.
Assemble the door header using
10d sinkers.
2x4-75" Board
12-3/4"
12-3/4"
Install (2) Two Blocks in Center
Step 8
Assemble Door Header
1.
Cut (2) two 2x4-8' boards to a length of 75".
Step 7
Assemble 137-1/2" Long Sidewalls
1.
Cut (2) two 2x4-12' to a length of
137-1/2". Position the boards together
and indicate with 'X' marks, where
the wall studs will be located.
24"
23-1/4"
137-1/2"
Wall Plate
24"
2.
Install pre-cut wall studs between the top & bottom plates.
3.
Butt wall frame to wall panel from previous step. Do Not nail these frames together so they
can be separated later.
4.
Install a siding panel but do not nail along the long edge that overlaps the other wall frame. You
can nail this edge after the wall panels are installed. This will enable you to separate the wall
panels making them easier to handle.
5.
Cut the last siding panel to a width of 45". The last panel will extend 3-1/2" past the frame.
6.
Repeat to assemble another sidewall frame. Separate walls and set aside.
