![Reynolds Building Systems the Belmont-R Скачать руководство пользователя страница 15](http://html.mh-extra.com/html/reynolds-building-systems/the-belmont-r/the-belmont-r_assembly-instructions-manual_1449749015.webp)
Step 17
Install Sidewall Trim & Soffit
Soffit
96-3/4' Long Corner Trim
1.
Install a 96-3/4" long 1x4 trim board flush with the
corner trim on the back of the building. This trim board
has blue paint on one end. Locate a 7/16" x 3" x 8"
gauge block packed in the hardware bag. Place this
gauge block under the truss overhang and butt
the corner trim against it. Use 8d galv. nails.
7/16" Gauge Block
1x4 Trim
It is easier to install the soffit if the corner and sidewall trim are installed first. This
enables the soffit to rest on the trim where it meets the building. See lower detail.
2.
Install another 96-3/4" long 1x4 flush
with front wall trim.
3.
Install 4' long 1x4 trim along the top
of the sidewall. Use the gauge block
to set where the trim will be installed.
4.
Install a 1x4-12' trim board along
the top of the sidewall. Install (2) two
1x4-4' trim board cut last one to fit.
5.
Repeat on opposite sidewall.
6.
Starting from back gable install a
4'x10-5/8" soffit panel with
bevelled edge. Cut the length so
the panel ends at center of 2nd truss.
Insure bevelled edge is facing truss
ends. Use 6d galv. nails.
7.
Install (2) two 6' long soffit panels.
8.
Install (2) two 4' long soffit panel
to finish.
9.
Repeat on opposite sidewall.
Bevel Edge
Butt to Gable Siding
End Center ed Under Truss