manualshive.com logo in svg

Reynolds Building Systems Best Barns Denver, Сборочная книга

Поделиться
Скачать
Reynolds Building Systems Best Barns Denver Скачать руководство пользователя страница 4

72" long 2x4

3/4" Plywood Gusset

Set these trusses aside. DO NOT use trusses for assembling the roof gables.

Step 1

Assemble Trusses

32" Top Gusset

3.

Position a Gable Plate on the floor. Use 2x4 blocks to hold the 2x4 plate straight.

4.

Position (2) two truss halves (2x4s connected with a metal plate) with the short legs against

the 2x4 Gable Plate. DO NOT attach the Gable Plate Assembly to the truss. It is temporarily
used to help hold the 2x4 truss parts in place and will be used in a later step.

5.

Secure 2x4 blocks around the perimeter of truss to hold truss parts in place.

Truss Half

Metal Plate

1.

Butt (2) two 72" long 2x4s together and secure them by nailing a 3-1/2" x 42-3/4" long

plywood gusset across the top where they butt together. Use glue and 6d common nails.
Install the gusset with the center line lined up where the 2x4 meet.

Temporarily screw 2x4 blocks to the floor to insure that all the trusses are assembled

the same. Short 2x4s, that may have an angle on one end, are supplied in the kit.

6.

Secure the 2x4s at the peak with a 12" x 32" wood gusset. Apply wood glue between

the gusset and truss and nail with (25) twenty-five 6d common nails.

7.

Turn the truss over and install a gusset to the other side of the truss.

8.

Repeat this process to assemble (8) eight more trusses.

2.

Repeat to assemble another Gable Plate.

2x4 Block

Gable Plate

Содержание Best Barns Denver





















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды