REXROTH MKE Series, Руководство по планированию проекта

Страница: 113 / 162

MKE Handling, Transport and Storage
10-1
DOK-MOTOR*-MKE*GEN2***-PR03-EN-P
10 Handling, Transport and Storage
10.1 Supplied Condition
On delivery are the MKE motors packed in cardboard boxes or crates.
Packing units on pallets are secured by retaining straps.
WARNING
Injuries due to uncontrolled movement of the
retaining straps when cutting!
⇒
Maintain a sufficient distance and carefully cut the
retaining straps.
On delivery ex works the motor drive shaft and the connectors have
protective caps. Remove the protective sleeves just before assembly.
Factory-attached test
All MKE motors undergo the following inspections, among others, at the
factory:
•
High voltage test according to DIN EN 60034-1/02/99
•
Insulation resistance according to EN 60204-1/1.92, Section 20.3.
•
Protective connection according to EN 60204-1/1.92, Section 20.3.
•
Test winding resistance
•
Concentricity and position tolerances of shaft end and fastening
flange according to DIN 42955/12.81
•
Axial eccentricity of the flange face to the shaft according to DIN
42955/12.81.
•
Axial eccentricity of the centering shoulder to the shaft according to
DIN 42955/12.81.
•
Test brake holding torque (option)
Test on the customer side
Since all MKE motors undergo a standardized inspection procedure,
high-voltage inspections by the customer are not required. Motors and
components could be damaged if they undergo several high-voltage
inspections.
DANGER
Destruction of motor components by improperly
executed high-voltage inspection! Invalidation of
warranty!
⇒
Avoid repeated inspections.
⇒
Observe the regulations of EN 60034-1
(= VDE 0530-1).
Electrical inspection
Mechanical inspection