REXROTH MKE Series, Руководство по планированию проекта

Страница: 76 / 162

7-4
Accessories and Options MKE
DOK-MOTOR*-MKE*GEN2***-PR03-EN-P
7.3 Gearboxes
Planetary gearbox
Planetary gearboxes of the series GTS and GTP are suitable for
assembly on MKE motors.
They are suited for use in S5-operation in gear racks or toothed belts in
handling systems with high speed and accelerations (e.g.: loader,
robots).
Note: Encoders have no check on Ex-protection. For MKE motors
with assembled encoders Bosch Rexroth assumes no liability.
The Ex-protection verification certificate refers exclusively to
the MKE motors. All further mechanical add-on pieces are not
considered and need an additional discharging of the
machine manufacturer.
•
Low-maintenance operation owing to lifetime lubrication
•
Use under adverse environmental conditions is possible (owing to the
completely closed design in IP 65 degree of protection)
•
Low-play gear teeth with minimum reverse play owing to ground gear
pairs
•
High torsional strength owing to load distribution to three planetary
wheels
•
High efficiency owing to planetary wheel principle
•
High dynamics owing to low masses of inertia
•
Low weight owing to compact design
•
Direct overhung mounting of pinions and belt pulleys, owing to the
bearing being designed for high permissible radial loads
•
The flange design allows attachment according to design B5 (EN
60034, Part -7, ed. 1993) with hole in the flange.
The output shaft can be mounted in two different ways:
•
friction-locked shaft-hub connection by means of a plain shaft, or
•
friction-locked shaft-hub connection by means of an output shaft with
keyway.
High operational reliability
High performance data
Easy attachment to machine