REXON AP3300, Инструкция по эксплуатации

Страница: 5 / 20

2
● Read manual before using thicknesser.
● Wear safety goggles.
● Never perform planning operation
with cutterhead guard or belt guard
removed.
● Never make planning cuts greater
than 1/32 in. (0.8 mm).
● Never perform planning cuts on
workpieces shorter than 14 in.
(35.6 cm) in length.
● Turn power OFF, wait for blade to stop
and remove power cord from power
source before adjusting or servicing.
WHEN INSTALLING OR MOVING THE
THICKNESSER
1. AVOID A DANGEROUS ENVIRONMENT:
● Use the thicknesser in a dry, indoor
place protected from rain.
● Keep work area well-lit.
2. TO AVOID INJURY FROM UNEXPECTED
THICKNESSER MOVEMENT:
● Bolt or clamp the thicknesser to a firm
level surface where there is plenty of
room to move the workpiece through
the entire cut.
● Support the thicknesser so the tables
are level and thicknesser does not rock.
● Put the thicknesser where operators
nor bystanders will stand in line with
the wood while planning.
● To avoid injury from electrical shock,
make sure your fingers do not touch
the plug’s metal prongs when plugging
in or unplugging the thicknesser.
● Turn OFF and unplug the thicknesser
before moving it to a new area. To
avoid back injury, get help when you
need to lift the thicknesser.
● Bolt the thicknesser to the floor if it
tends to move when planning long,
heavy boards.
● DO NOT STAND ON THE
THICKNESSER. Do not store
materials above or near it. Standing
on the tool to reach materials could
result in serious injury if it tips or is
accidentally contacted.
20. CHECK DAMAGED PARTS. Before
further use of the tool, it should be
carefully checked to determine that it
will operate properly and perform its
intended function. Check the alignment
of moving parts, binding of moving
parts, breakage of parts, mounting and
any other conditions that may affect its
operation. A guard or other part that is
damaged should be properly repaired
or replaced by an authorised service
centre unless otherwise indicated in this
instruction manual. Do not use the tool if
the switch does not turn it on and off.
21. ACCESSORY WARNING. The use of any
accessory or attachment other than one
recommended in this instruction manual
may present a risk of personal injury.
22. HAVE YOUR TOOL REPAIRED BY
A QUALIFIED PERSON. This electric
tool complies with the relevant safety
rules. Repairs should only be carried
out by a qualified person using original
spare parts, otherwise this may result in
considerable danger to the user.
23. ATTACH THE MACHINE TO A WORK
SURFACE/BENCH. Ensure that the
machine is securely fixed to a bench or
other work surface wherever possible.
Additional Safety Rules for
Thicknesser
1. Your thicknesser comes completely
assembled. The only assembly required
is the cutterhead depth adjustment
handle. Mount your thicknesser to a
work bench or an adequate surface.
2. Learn to use the function of the ON/OFF
switch, elevation handle, cutterhead
guard, outfeed table, infeed table and
push blocks.
3. Review and understand all safety
instructions and operating procedures in
this instruction manual.
4. Review the maintenance methods for
this thicknesser.
5. Find and read all the warning labels
found on the thicknesser: