Autogard Series XG
• Installation and Maintenance Instructions
Sizes 3 & 4
(Page 13 of 21)
British Autogard Ltd. 2 Wilkinson Road, Cirencester, Gloucestershire, GL7 1YT, UK
DX0001
Telephone: +44 (0)1285 640333
October 2017
http://www.rexnord.com/autogard
Supersedes NEW
5. Only reset modules when fitted in a torque limiter
d.
Re-fitting Modules
If modules are to be re-fitted into their original ports with the original module seats, and the module clamp screws
have not been disturbed, proceed as follows, otherwise proceed as for new modules Section e : Fitting New
Modules.
1. Align red markers.
2. Apply BP Energrease LS3 or similar to seats
3. Match and refit modules
4. Refit screws
= Use Loctite 243
d
h
T
Nm
ft.lbf
M6
5
11
8
!
