Rexnord XG Series, Инструкция по установке и обслуживанию

Страница: 21 / 21

Autogard Series XG
• Installation and Maintenance Instructions
Sizes 3 & 4 (Page 20 of 21)
British Autogard Ltd. 2 Wilkinson Road, Cirencester, Gloucestershire, GL7 1YT, UK DX0001
Telephone: +44 (0)1285 640333 October 2017
http://www.rexnord.com/autogard Supersedes NEW
10. Refit guards compliant with local codes.
17. Troubleshooting
Problem Possible Cause Action
Frequent tripping Fault in driven machine Rectify
Torque setting too low Adjust trip torque within safe limits
for driving and driven equipment.
All modules not reset Reset all modules
Worn module plungers or seats Replace modules
Failure to trip on
overload Torque setting too high Adjust trip torque
Module seized Replace module
Torque limiter bearing seized Replace bearing
Excessive backlash Modules loose or incorrectly fitted Follow installation procedure
Worn module plungers or seats Replace worn parts
Worn torque limiter bearing Replace bearing
Worn coupling or loose fasteners Replace worn parts, tighten
fasteners
!