Rexing H2, Руководство пользователя

Страница: 11 / 32

11
Camera Operation
OFF Mode
The OFF mode is the safe mode when any
actions need to be taken (e.g. Replacing the SD
card or batteries, or transporting the device).
ON Mode
The camera will take photos or videos
automatically ( with its current settings) when it is
triggered by the PIR sensor’s detection of activity
in the area it monitors .
TEST Mode
In the TEST mode , you can check and change
the settings of the camera by using its built-in
LCD screen . The settings in the TEST Menu will
let you change the photo or video resolution,
time interval between photos, switch the time
imprint on, etc.
Photo/Video Modes
Photo: Capture photos with motion detection.
Video: Capture video clips with motion detection.
Photo + Video: Capture both photos and videos
with motion detection.
Basic Operation
There are three basic operation modes:
•
OFF M ode: Power switch in the OFF position
(LCD screen is off).
• ON M ode: Power switch in the ON position
(LCD screen is on).
• TEST M ode: Power switch at TEST position.
Change Setting in
TEST Mode
The main purpose of the TEST mode is to allow
you to change the settings of the camera so
that you trail camera operates exactly the way
you want it to.
•
Press the UP key, then press SHOT to take a
video for a test.
• Press the DOWN key, then press SHOT to
take photo for a test.
• Press the MENU button, the setu p options
will be showing on the LCD screen .
• Press the UP or DOWN key , scroll to the
next or previous parameter.
• Press the RIGHT or LEFT key to change the
setting.
• Press the OK button to save the new setting.
• Press the MENU button to exit the setup
menu.