Rexing H2, Руководство пользователя

Страница: 10 / 32

10
Instal l ation
Power Supply
Batteries Installation
Open the camera by unlocking two latch first.
The battery compartment is the right part of the
camera. Open the protective cover of the battery
compartment and insert eight ( 8x ) 1.5v LR6/AA
batteries into the battery slots. Make sure to
insert each battery with correct polarity (+ and -
end ) against the long spring of each battery slot.
Using an External Power Source
Optionally, you can connect an external 6V DC
power source with at least 1.5A to the DC Port
port at the bottom of the camera. The power
connector is a 3.5x1.35 mm coaxial DC power
plug with positive tip (inside pin) polarity. Leave
internal batteries in the camera during use.
• Insert the SD card into the card slot. A click
sound indicates that the card is installed
successfully. If the wrong side of the card is
facing up, you will not be able to insert it
without force (T here is ONLY ONE correct
way to insert cards ) .
• To take out the SD card, just gently push in
the card (do not try to pull it out without
pushing in first). The card will be released
from the slot and ready to be removed
when you hear the click .
Inserting the SD Card
The camera uses a Micro SD (Secure Digital)
memory card to save photos (in . jpg format)
and/or videos (in .AVI format). SD and SDHC
(High Capacity) cards up to a maximum 32GB
capacity are supported.
Insert the SD card ( when the camera in OFF
Mode ) before beginning to operate the camera.
(DO NOT insert or remove the SD card when the
camera is in ON Mode)
Before inserting a memory card, please open
the front cover and make sure that the write
-protect switch on the side of the card is OFF
(NOT in the Lock position).
Note:
Note:
• NEVER INSTALL DIFFERENT TYPES
OF BATTERIES or NEW AND OLD
BATTERIES in the product at the
same time.
• Anytime you load or unload
batteries, make sure that the
camera is OFF . If using external
power source, do not remove
internal batteries.
• Be sure the camera’s power is
switched OFF before inserting or
removing SD cards or batteries.
• Camera cannot be operate d
without an SD memory card
installed.